Your Cart

Jackets, Hats and Gloves

Model: SA81TO

Hi-Visibility Two Tone Fleece Jacket - Tow Op - Unisex

Comfortable, fleece jacket for everyday wear. Form fitting and available with cresting for Tow Operators, the SA81 meets all your outerwear requirements.Class 2 Level 2 striping package. Two-tone yellow and midnight blue bottomDurable cuffsEpaulette loopsPortable radio mike clipTwo slash pocket..
Model: SA81B

Hi-Visibility Two Tone Unisex Fleece Jacket - Blank

Comfortable, fleece jacket for everyday workwear. Designed with a room fit for lifting and work and to wear over your uniform shirt, the SA81 meets all your outerwear requirements. Features:Class 2 Level 2 reflective striping package. Two-tone yellow and midnight blue bottomDurable cuffs a..
Model: SA92

3-in-1 Safety Winter & Rain/Reversible Hi-Vis Jacket

 FITS LARGER, PLEASE CONSIDER ORDERING 1-SIZE DOWNThis is a 3-in-1 Safety Rain/Reversible Hi-Vis Jacket.  The outer jacket is made up of 100% Premium Polyester waterproof Oxford with breathable PU coating in fluorescent Yellow colour on top and Dark Navy colour on the bottom.  The inn..
Model: G15

EMS Cut Resistant Tactical Gloves

Ergonomic Cut And Fit , Cut Resistant Shell Provides Cut Resistance And Flash Protection To 800 Degrees F(427 C) , Water Resistant, Leather, Elastic wristXL-Length 13-3/4 inches, width 4-1/2 inches ..
Model: G10

Leather Gloves

Sizes M, L, XLGrain goatskin palm & backhandC100 Thinsulate™ insulationSlip-on cuffShirred elastic wristGunn cut w/keystone thumb..
Model: G12

Lined Nitrile Coated HPPE (Cut/Impact) Gloves

Sizes M, L, XL13 ga. HPPE outer shell, 7 ga. HPPE inner shellNitrile palm coating w/textured finishAcrylic liningTPR backhand impact protectionElastic knit wrist w/hemmed cuffRatingsANSI Cut Level A6ANSI Abrasion Level 5ANSI Puncture Level 4ANSI Impact Level 2Hazard SolutionsAbrasion ResistantC..
Model: G14

Nitrile Coated 13 ga. HPPE (Cut/Needle) gloves

13 ga. nylon/HPPE/steel wire shellFoam nitrile palm coating w/smooth finishSteel wire/cotton inner palm liningElastic knit wrist w/hemmed cuffRatingsCut Level A9 (ANSI/ISEA 105-2016)Puncture Level 5 (ANSI/ISEA 105-2016)Needlestick Level 5, Palm Only (ANSI/ISEA 105-2016)Hazard SolutionsCut ResistantN..
Model: G13

Nitrile coated nylon gloves

Nylon shellFoam nitrile palm coating w/porous finishElastic knit wrist w/hemmed cuffRatingsANSI Cut Level A1EN 388 - 4132XHazard SolutionsAbrasion ResistantCut ResistantPuncture ResistantTear ResistantFeatures360 Degree CoverageBreathableDexteritySolid Grip..
Model: SA81P

Paramedic Hi-Visibility Fleece Jacket - Unisex

Comfortable, fleece jacket for everyday wear by Paramedics. Comfortable fit for work and designed for field use, the SA81 meets all your Paramedic outerwear requirements.Features:Class 2 Level 2 reflective striping package. Two-tone yellow and midnight blue bottomDurable cuffs and waistParamedi..
Model: SA83

Reversible Hi-Vis Yellow/Black Uniform Jacket

FeaturesANSI Class 3 Rated320D Taslon Nylon ShellBreathable and waterproofBadge tab on both sidesHi-Vis yellow reverses to blackSide zipper for accessing inside pocketHi-Vis reflective tapeSeam sealed constructionYKK zipperSide arm access snap closureElastic waistband and cuffsEpaulettes on black si..
Model: SA90

Safety Rain Two-Tone Jacket

 100% Polyester Oxford waterproofColour: Yellow/LAPD   CAN/CSA Z96-09 Class 2, Level 2 ANSI 107-2010 Class 2, Level 2(worn with SP91 or SP92 or SO96, standard becomes :CAN/CSA Z96-09 Class 3, Level 3 & ANSI 107-2010 Class 2, Level 2.)Fabric 100% Premium Polyester waterpr..
Brand: Ronco Model: G11

Split Leather Fitter Double Palm With Safety Cuff

 These split leather fitters come with a safety cuff for added wrist protection on jobs that may require abrasion or cut resistance. Manufactured with a double leather palm for added hand protection, split leather fitters are preferred in general maintenance, industrial and wareh..
Showing 1 to 12 of 16 (2 Pages)